Adjusting A Headlight Beam; Tail/Brake Light; Removing A Wheel - Yamaha YFM700RE Owner's Manual

1. Do not touch the glass part of the bulb.
5. Install the headlight bulb holder by pushing it
in and turning it clockwise.
6. Install the headlight bulb holder cover.
8
7. Place the headlight unit in the original posi-
tion, and then install the bolt.
8. Adjust the headlight beam if necessary.
EBU25561

Adjusting a headlight beam

ECB00690
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting bolt in direction (a).
To lower a headlight beam, turn the adjusting bolt
in direction (b).
(a)
(b)
1
1. Headlight beam adjusting bolt
EBU26920

Tail/brake light

This model is equipped with an LED type of
tail/brake light.
If the tail/brake light does not come on, have a
Yamaha dealer check it.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
8-52