Disconnecting Mp3 From Your Pc; Charging Your Mp3 Player - Oregon Scientific MP303 User Manual

DISCONNECTING YOUR MP3 PLAYER FROM YOUR PC
Disconnecting the player while transferring data may corrupt the data
or result in data loss. Please follow the procedures below to disconnect
the player from your computer for the following operating systems.
Windows 98SE:
1. Double click the My Computer icon.
2. Right click the removable drive letter your player has been
3. Click "Eject" from list before disconnecting.
Windows ME, 2000, XP
Click the "Stop USB Mass Storage Device"
taskbar at the bottom right of the monitor to stop the device before
disconnecting.
Macintosh:
Drag and drop the "Untitled" icon from the desktop to the "Trash" icon
to eject the player before disconnecting.
NOTE: Before unplugging your player from your computer, wait at
least 15 seconds after the audio or data file transfer is complete to
prevent any data loss that may occur.

CHARGING YOUR MP3 PLAYER

Before using your MP303 player for the first time, you should first
charge the battery by connecting your player to the computer using
the supplied USB cable.
To charge the battery:
1. Connect the USB cable to the USB port of PC.
2. Connect the mini-USB connector to your MP303 player's USB
MP303 Eng r10 OP
assigned.
port. (A distinctive "splash" screen will be displayed while the
unit is connected to the PC).
6
icon on the Windows
6
9/16/04, 5:47 AM