Disconnecting Player From Computer; Power On / Off; Power On - Oregon Scientific MP 120 User Manual

1. Double click the My Computer icon.
2. Double click the drive letter (i.e. Removable Disk (H:)) of your
player assigned by the computer.
3. Drag and drop the file(s) you wish to copy from your computer
onto your player.
NOTE: You will not be able to view or play any of the stored data
unless it is one of the supported MP3 (MPEG-1, Audio Layer 3)
or WMA (Windows Media Audio) / WMA DRM audio formats.
CAUTION: To prevent data loss, wait at least 15 seconds to make
sure the file transfer is complete before unplugging your player from
the computer.

DISCONNECTING PLAYER FROM COMPUTER

WINDOWS 98SE
1. Double click the My Computer icon.
2. Right click the removable drive letter your player has been assigned.
3. Click "Eject" from list before disconnecting.
WINDOWS ME, 2000, XP
1. Click the "Stop USB Mass Storage Device"
Windows taskbar at the bottom right of the monitor.
2. Click your player drive letter to stop the device before
disconnecting.
MACINTOSH OS 9.0 OR ABOVE
Drag and drop the "Untitled" icon from Mac desktop to the "Trash"
icon to eject the player before disconnecting.

POWER ON / OFF

POWER ON

MP120 EngManl R4(V1.1) OP
All manuals and user guides at all-guides.com
To turn the power on, press and hold
2 seconds. The unit will enter STOP status
with the
NOTE: In STOP status, a power saving
feature will cause your MP3 player to
automatically shut off if no key is pressed for
1 minute.
6
¶´ƒ
icon on the
icon displayed.
6
11/4/04, 5:40 PM
for