Record Settings - Oregon Scientific MP303 User Manual

NOTE: Remember to scroll past Auto Dimmer or Equalizer as the
Power savings cannot be seen on the first page of the screen.
4. Once "Power savings" has been highlighted, press the
5. Move the
6. When the desired setting has been reached, press the

RECORD SETTINGS

The Record Settings sub-menu is used to:
• Determine the source of a recording (either the internal
• The type of encoding (default encoding is ADPCM).
• The data rate for encoding.
To change the record settings:
1. On the Main Menu, use the
2. On the "Settings" Menu, use the
3. To modify the source for recording, press the
4. Scroll down until the "Encoder" value is highlighted, and press
5. Scroll down until the "Channel" value is highlighted, and press
6. Scroll down until the "Rate" is highlighted, and press the
7. When the desired setting has been reached, press the
MP303 Eng r10 OP
MENU / ON button.
key up (or down) to select "Disable", "1 min",
"2 mins", "5 mins" or "10 mins."
MENU / ON button to return to the "Settings" Menu, or press
and hold the or MENU / ON button to return to the Main Menu.
microphone or the internal FM radio).
"Settings," then press the
"Record settings," then press the
between "Microphone" and "FM" (microphone is the default setting).
the or MENU / ON button to select the encoding method
desired (ADPCM is the default encoding method).
the key to toggle between "Stereo" and "Mono."
key to scroll through the available data rate options.
MENU / ON button to return to the "Settings" Menu, or press
and hold the or MENU / ON button to return to the Main Menu.
21
key to scroll down to select
or MENU / ON button.
key to scroll down to select
or MENU / ON button.
21
or
or
key to toggle
or
9/16/04, 5:47 AM