Programming; Manual Programming - Baofeng UV-5RV2+ Operating Manual

Programming

Memory channels are a simple and efficient way to store the most commonly used frequencies so they can be quickly accessible
for later use.
The Baofeng UV-5R has the capability to store up to 128 memory slots that can hold any of the following information:

Receive/Transmit Frequencies

Transmit Power Settings

Group Signaling Information

Bandwidth

ANI/PTT-ID Settings

6 Character Alphanumeric Channel Name

Manual Programming

When programming channels in VFO mode, it is important to remember that only the frequency displayed on the upper channel
(A) can be saved. To create a new channel, start by switching the radio to Frequency (VFO) mode using the [VFO/MR] button.
When in Frequency (VFO) mode, select the desired receive frequency using the numeric keypad. Next, use the menu system to
configure any additional details for the channel that you want to store to the radio's memory (Examples Include: Transmit
Power, Bandwidth, CTCSS or DCS, etc.)
For more information on how to use the Menu, see the chapter titled "Using the Menu System".
Simplex Channels
To save a Simplex channel, please follow the steps below:
Procedure: Saving (Programming) a Simplex Channel to Memory
1. Press the [MENU] button to enter the menu.
2. Enter [2] [7] on the numeric keypad to get to MEM-CH.
3. Press the [MENU] button to select.
4. Use the [UP] and [DOWN] buttons to select a memory channel, or enter it in directly on the numeric keypad.
5. Press the [MENU] button to confirm.
Press [EXIT] to switch to Channel (MR) mode with the button to test the new channel. To name the channel, you must connect
the radio with the Baofeng PC software.
http://www.baofengradio.us
http://baofengradio.us
33