Power-On Message - Baofeng UV-5RV2+ Operating Manual

Power-On Message

The power-on message can only be customized via the Baofeng PC software. For more information, see the section
"Programming" for details on how to install, set-up, and use the software.
The following instructions are written assuming that the Baofeng software has already been installed and is running and that the
Baofeng radio is connected to the PC that is running the Baofeng software.
Procedure: Setting the Power-On-Message
1. Click the "Other" button on the menu bar. This should trigger the opening of a dialog box titled "Other".
2. In the box titled "Power On Message", there are two text fields representing the lines on the LCD screen. Enter the
desired text in the fields.
3. Click the "Write" button to write the changes to the radio.
4. On the radio itself, ensure that menu item 38 is set to MSG.
Note: The UV-5R can only display 7 characters per line.
http://www.baofengradio.us
http://baofengradio.us
32