Battery Level Indicator; Status Led; Side Button 1 - Call (Broadcast Fm And Alarm); Side Button 2 - Moni (Monitor And Flashlight) - Baofeng UV-5RV2+ Operating Manual

http://www.baofengradio.us 16

Battery Level Indicator

When the battery level indicator has no black bars showing, it means the battery is close to depletion. To warn the user of this,
the radio will start beeping periodically as well as flashing the backlight of the display, indicating that the battery needs to be
changed.

Status LED

The status LED has a very simple and traditional design. When a signal is received, it turns green, when transmitting, it turns red,
and is off when in standby.
Side Button 1 – Call (Broadcast FM and alarm)
Press [CALL] momentarily to start the broadcast FM receiver. Another momentary press turns the broadcast FM receiver off.
Press and hold to [CALL] activate the alarm function. Press again to turn it off.
Side Button 2 – MONI (Monitor and Flashlight)
Press [MONI] momentarily to turn on the LED flashlight. Another momentary press turns the flashlight off.
Press and hold [MONI] to monitor the signal. This will open up the squelch and permit listening to the unfiltered signal.
VFO / MR – Mode Button
Pressing [VFO/MR] switches between Frequency (VFO) Mode and Memory (MR) Mode.
Memory mode is sometimes also referred to as Channel mode.
To save frequencies to channel memory the radio must be in Frequency (VFO) mode.
A / B – Select Button
The [A/B] button switches between A (upper) and B (lower) displays. The frequency or channel on the selected display becomes
the active listening and transmit frequency or channel.
Note: To save frequencies to channel memory the radio must be set to use the A display.
http://baofengradio.us