Aspect; Project Way - Eiki EK-103X Owner's Manual

Aspect

You can set a screen size to fit the image while
maintaining the aspect ratio of the input signal.
1. Press  to select "Aspect" and then
press the OK button.
2. Press  button to select the item, then
press the OK button.
Normal
Projects the image at the maximum size while
maintaining the aspect ratio of the input signal.
Wide
Projects the image at 16:9 aspect ratio.
Full
To provide an image to fit the screen.
Advanced (PC input only)
Adjust the proportion and position of the screen
manually.

Project Way

This function is used to set the project way.
1 Press MENU button on the remote control
to display screen menu. Press  button to
select "Display", then press the OK button.
2 Press button to select "Project way",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Front
Projects to front screen when projector is front
standing.
Rear
Projects to rear screen when projector is front
standing.
Ceiling/Front
Projects to front screen when projector is in ceiling
state.
Ceiling/Rear
Projects to rear screen when projector is in ceiling
state.
Display
Aspect menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Project way menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
27