Input Select - Eiki EK-103X Owner's Manual

Input select

Direct Operation
Press VGA, ViIDEO or HDMI on the remote
control as input source.
Menu operation
1 Press INPUT button on the top control or
remote controll to display the input select
menu.
2 Press  button to select VGA, HDMI,
Component, Video or S-video, then press the
OK button.
When input source is from
VGA
computer connected to VGA
terminal with VGA cable, please
select "VGA"..
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
Select it when the input source
Component
is from the video equipment
connected to YPbPr terminal.
Select it when the video input
Video
signal is connected to VIDEO IN
terminal.
Select it when the video input
S-video
signal is connected to S-VIDEO
IN terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
Basic operation
Remote control
INPUT
VGA
Top control
Input select menu
INPUT
VGA VIDEO HDMI
AUTO MENU
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME
TIMER
- -
INPUT button
VGA
HDMI
Component
Video
S-video
VIDEO
HDMI
23