Side-Discharging The Clippings - Toro Recycler 20070 Operator's Manual

If the side discharge chute is on the mower, remove it and
lock the side discharge door (refer to Removing the Side
Discharge Chute) before bagging the clippings.
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Grass Bag
1. Raise and hold up the rear door (Figure 21).
Figure 21
2. Remove the rear discharge plug (Figure 22).
Figure 22
3. Install the bag onto the door rod (Figure 23).
Figure 23
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the rear
discharge plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: Ensure that the rear discharge plug is in
place before you side-discharge the clippings (Figure
24).
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Figure 24
Installing the Side Discharge Chute
1. Unlock the side discharge door (Figure 25).
Figure 25
2. Lift open the side discharge door (Figure 26).
Figure 26
3. Install the side discharge chute and close the door onto
the chute (Figure 27).
10