Yamaha BIG BEAR 250 YFM25BZ Owner's Manual page 120

ECB01100
NOTICE
G
Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
G Do not leave or store the battery on its side.
To install the battery
TIP
Be sure the battery is fully charged.
1. Install the battery.
2. Connect the positive battery lead.
3. Install the holding plate by installing the bolts.
4. Connect the negative battery lead.
8
5. Make sure that the breather hose is properly
routed, in good condition, and not obstructed.
The breather hose end should measure 50.0–
60.0 mm (1.97–2.36 in) past the bottom hose
clamp.NOTICE: If the breather hose is posi-
tioned in such a way that the frame is ex-
posed to electrolyte or gas expelled from
the battery, the frame could suffer struc-
tural and external damages.
1. Battery
2. Battery breather hose
3. Hose clamp
4. Breather hose end
6. Install the battery cover.
[ECB00611]
8-41
1 2 3
4