1. Brake lever free play adjusting nut
2. Brake pedal free play adjusting nut
3. Adjusting the brake lever free play
The brake lever free play should measure
5.0–7.0 mm (0.20–0.28 in) as shown. If the
free play is incorrect, adjust it as follows.
1. Brake lever free play
2. Locknut
3. Brake lever free play adjusting bolt
a. Loosen the locknut at the brake lever and
fully turn in the brake lever free play adjust-
ing bolt.
b. Turn the brake lever free play adjusting nut
on the brake cable at the rear wheel hub so
that the distance between the brake cam-
shaft lever and the pin, gap "A", measures
0–1 mm (0–0.04 in).
8-32
8