Checking And Lubricating The Cables; Checking And Lubricating The Front And Rear Brake Levers - Yamaha BIG BEAR 250 YFM25BZ Owner's Manual

TIP
Turning the clutch adjusting screw in direction (a)
decreases clutch free play and turning it in direc-
tion (b) increases clutch free play.
4. Tighten the locknut to the specified torque.
Tightening torque:
Locknut:
15 Nm (1.5 m·kgf, 11 ft·lbf)
TIP
When tightening the locknut, hold the clutch ad-
justing screw with a screwdriver so that it does not
turn together with the locknut.
8
5. Install the footboard.
EBU24901

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
Recommended lubricant:
Engine oil
EWB02581
WARNING
G
Inspect cables frequently and replace if dam-
aged. Corrosion can result when the cable
sheaths become damaged, and cables can
also become frayed or kinked, which could
restrict the operation of controls and lead to
an accident or injury.
G Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.
EBU28711
Checking and lubricating the front and
rear brake levers
The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.
8-35