Engine Maintenance; Servicing The Air Cleaner - Toro 74833 Operator's Manual

Zero-turn-radius riding mower
Table of Contents

Advertisement

Figure 33
1. Front caster tire
4. Connect a grease gun to each fitting (Figure 33 and
Figure 32). Pump grease into the fittings until grease
begins to ooze out of the bearings.
5. Wipe up any excess grease.
1
G009949

Engine Maintenance

WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away the muffler and other hot surfaces.

Servicing the Air Cleaner

Service Interval: Before each use or daily—Check the
air cleaner for dirty, loose or damaged
parts.
Every 25 hours/Yearly (whichever
comes first)—Service the foam
element. (more often under dusty,
dirty conditions)
Every 50 hours—Service the paper
element. (more often under dusty,
dirty conditions)
Every 100 hours/Yearly (whichever
comes first)—Replace the paper
element. (more often under dusty,
dirty conditions)
This engine is equipped with a replaceable, high density
paper air cleaner element. Check the air cleaner daily or
before starting the engine. Check for a buildup of dirt
and debris around the air cleaner system. Keep this area
clean. Also check for loose or damaged components.
Replace all bent or damaged air cleaner components.
Note: Operating the engine with loose or damaged air
cleaner components could allow unfiltered air into the
engine causing premature wear and failure.
Note: Service the air cleaner more often under
extremely dusty, dirty conditions.
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan zx6030

Table of Contents