Toro 74833 Operator's Manual page 32

1
3
5
Figure 36
G009950
2
4
6
G010457
5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the Full mark.
6. Install the oil fill cap/dipstick.
7. Check the oil level; refer to Checking the Oil Level.
8. Slowly add additional oil to bring it to the full mark.
9. Install the oil fill cap/dipstick .
Changing the Engine Oil Filter
Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 37).
1
3
5
32
2
4
6
3/4
Figure 37
G009950
G008748