Filling The Engine With Oil; Product Overview - Toro 20817 Operator's Manual

6. Filling the Engine with Oil

Procedure
Important: Your mower does not come with oil
in the engine.
1. Remove the dipstick (Figure 8).
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full mark on the dipstick (Figure 8).
Do not overfill. (Max. fill: 0.59 l, type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours
; change it yearly thereafter.
Refer to Changing the Engine Oil.
Figure 8

Product Overview

1. Upper handle
2. Blade control bar
3. Recoil start handle
4. Rear door
5. Cutting height adjustment
button
6. Fuel tank cap
7. Air filter
7
Figure 9
8. Spark plug
9. Cutting height setting
10. Oil fill/Dipstick
11. Handle height adjustment
knob (2)
12. Grass bag
13. Handle knob (2)