Assembling The Grass Bag; Installing The Starter Rope; Adjusting The Handle Height - Toro 20817 Operator's Manual

handle knobs as shown in Figure 3. Tighten the
handle knobs securely.
Note: Ensure that the cables are routed as illustrated
in Figure 4.
1. Cables

3. Installing the Starter Rope

Procedure
Pull the starter rope through the rope guide on the
handle (Figure 5).
1. Starter rope

4. Adjusting the Handle Height

Procedure
You can set the handle to 3 height settings: high,
medium, and low (Figure 3). Select the handle height
setting most comfortable for you.
1. Loosen the handle height adjustment knobs.
2. Set the handle to the desired position.
3. Tighten the handle height adjustment knobs.
Figure 4
Figure 5
2. Rope guide

5. Assembling the Grass Bag

Procedure
1. Attach the two side channels of the grass bag to the
grass bag frame as shown in (Figure 6).
1. Grass bag frame
Note: Start on one end of the channel and push it
onto the frame.
2. Ensure that the sides of the bag base are inside the
bag frame as shown in (Figure 7).
1. Bag base
6
Figure 6
2. Side channel
Figure 7