Canon MG6400 series Online Manual page 100

3. Click Preview.
Preview image appears in the Preview area.
Note
Colors are adjusted based on the document type selected in Select Source.
4. Set Destination.
5. Set Output Size according to purpose.
Output size options vary by the item selected in Destination.
6. Adjust the cropping frames (scan areas) as required.
Adjust the size and position of the cropping frames on the preview image.
Adjusting Cropping Frames (ScanGear)
7. Set Image corrections as required.
8. Click Scan.
Scanning starts.
Note
Click (Information) to open a dialog box in which you can check the current scan
settings (document type, etc.).
A response of ScanGear after scanning can be specified in Status of ScanGear
dialog after scanning on the Scan tab of the Preferences dialog box.
100