Printing On Postcards - Canon MG5500 series Online Manual

Printing on Postcards

This section describes the procedure for postcard printing.
1. Load postcard on the machine
2. Select paper size in the
Select Postcard or Postcard Double from the Paper Size menu.
Important
Return postcards can be used only when you print them from the computer.
When printing a return postcard, always set the paper size to Postcard Double
from your application software or the printer driver.
Do not fold the return postcard. If a crease is formed, the machine will not be
able to feed the postcard properly, and this condition will cause line shifts or a
paper jam.
With return postcards, borderless printing cannot be used.
3. Select Quality & Media from the pop-up menu
4. Select the media type
For Media Type, select the same paper type loaded in the machine.
Important
This machine cannot print on postcards that have photos or stickers attached.
When printing on each side of a postcard separately, you will get cleaner
printing if you print the message side first and then print the address side.
5. Complete the setup
Click Print.
When you execute printing, the data will be printed onto the postcard.
Print Dialog
29