Network Selection Screen - Canon MG3500 series Online Manual

Network Selection Screen

You can select the scanners or printers to be used for scanning or printing over a network
from your computer.
Network Selection Screen
In Product Name in the Settings (General Settings) dialog, select an item with "Network"
after the product name from the list, then click Select that appears to the right of the
product name to display the network selection screen.
• Scanners
The Bonjour service names of the scanners or printers that can be used over the
network are displayed.
You can select one scanner or printer per model.
Important
You cannot use over the network if Bonjour is disabled. Enable Bonjour on your
scanner or printer.
If you have changed the Bonjour service name after selecting your scanner or
printer by Bonjour service name, reopen the network selection screen and select the
new Bonjour service name from Scanners.
• Instructions
Opens this guide.
Note
If the Bonjour service name of your scanner or printer does not appear or cannot be
selected, check the following, click OK to close the screen, then reopen it and try
selecting again.
The scanner driver is installed
Network settings of your scanner or printer is completed after installing the scanner
driver
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network
Communication" for your model from Home of the Online Manual.
65