Faq - TP-Link Archer C59 User Manual

FAQ

Q1. What can I do if I forgot my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered, please connect your computer to the router using a cable and follow the
steps below:
1. Visit http://tplinkwifi.net.
2. Go to Advanced
password.
Q2. What can I do if I forgot my login password of the web management
page?
The default username and password of the web management page are
lowercase). If your router supports Password Recovery and you have enabled it,
please follow the steps below to reset the password without resetting the router:
Note: Make sure the Internet access is available before using this method.
1. Visit http://tplinkwifi.net.
2. Click Forgot password
you set.
3. Log into your mailbox to copy the verification code.
4. Paste the verification code on the window which pops up in Step 2.
5. Click Confirm (the default login username and password will be reset as
the click).
6. Use admin (in lowercase) as both username and password to login.
Tips: Please refer to Password Recovery
If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: press and hold the Reset button for about
7 seconds and then release;
2. Visit http://tplinkwifi.net, enter
to login.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your
new password for future use.
Q3. I cannot log into the router's web management page, what can I do?
This can happen for a variety of reasons. Please try the methods below to login again.
• Make sure the router connect to the computer correctly and the corresponding LED
indicator(s) light up.
> Wireless > Wireless Settings
> Send Code, the verification code will be sent to the mailbox
to learn how to configure Password Recovery.
admin (in lowercase) as both username and password
to retrieve or reset your wireless
admin (in
admin after
92