Table of Contents
Advertisement
IV. Turn off the WiFi Concurrent 300Mbps Business AP and the client, then
restart it and then turn on the client again.
V.
Ensure that the LEDs are indicating normally. If not, make sure that the
power and Ethernet cables are firmly connected.
VI. Ensure that the IP Address, subnet mask, gateway and DNS settings are
correctly entered for the network.
If you are using other wireless device, home security systems or ceiling fans,
VII.
lights in your home, your wireless connection may degrade dramatically.
Keep your product away from electrical devices that generate RF noise such
as microwaves, monitors, electric motors...
B. What can I do if my wireless client can not access the Internet?
I.
Out of range: Put the device closer to your client.
II.
Wrong SSID or Encryption Key: Check the SSID or Encryption setting.
III. Connect with wrong AP: Ensure that the client is connected with the correct
Access Point.
i. Right-click on the Local Area Connection icon in the taskbar.
ii. Select View Available Wireless Networks in Wireless Configure.
Ensure you have selected the correct available network.
iii. Reset the WiFi Concurrent 300Mbps Business AP to default setting
C. Why does my wireless connection keep dropping?
I.
Antenna Orientation.
i. Try different antenna orientations for the WiFi Concurrent 300Mbps
Business AP.
ii. Try to keep the antenna at least 6 inches away from the wall or other
objects.
II.
Try changing the channel on the WiFi Concurrent 300Mbps Business AP,
and your Access Point and Wireless adapter to a different channel to avoid
Advertisement
Table of Contents
