Table of Contents
Advertisement
Configuration
Reset to Default
(Press 13
sec)
2. The
For Master AP, there is no effect on this button
behavior.
1. Press the Reset/WEC button for about 20
WEC/Reset
(Press 20
2. Then, the device will reboot automatically and
sec)
It takes about 2 minutes to finish the reset to factory
default operation.
seconds and release it.
Slave
AP
un-configured device, so that it can be paired
with another Master or configured Slave AP
later.
seconds till the Status LED becomes solid
Green to indicate that the reset to default
function is triggered. Release the button.
apply the factory default settings as well.
will
be
marked
as
an
Advertisement
Table of Contents
