One Master And Several Isolated Slaves - LevelOne WAP-6101 User Manual

2.2.1 One Master and several isolated Slaves

As illustrated in above figure, how to configure the three APs (AP1, AP2, AP3) to build up
the "staff" wireless network? You can follow the procedure bellow:
Step
Set AP1 in Master Mode,
1 and configure it via web
UI.
Set AP2 and AP3 in Slave
2
Mode.
Button
1. Make sure AP1 is in Master Mode (WiFi LED
should be "Green" color, if not, you have to
toggle its AP mode via pressing the WEC button
for 9~10 seconds)
2. Login in to AP1 web UI and configure the
wireless settings as what you want (LAN IP,
SSID, encryption key, etc..).
1. Make sure AP2 / AP3 is in Slave Mode (WiFi
LED should be "Amber" color, if not, you have to
toggle its AP mode via pressing the WEC button
for 9~10 seconds)
Description