Crown PIP-3632 Specifications

PIP-4622
PIP-3632
PIP-4632
C rown ® ScreenArray ® PIP™ modules are
custom two-channel crossover networks
with equalization and delay specifi cally
designed for use with JBL ScreenArray cinema
speaker systems installed in cinemas, studio
production and post-production environments.
The PIP-4622 is designed for use with model
4622 ScreenArray system, the PIP-3632 is
designed for use with model 3632 ScreenArray
system, and the PIP-4632 is designed for use
with model 4632 ScreenArray system.
The ScreenArray PIP modules install into the
back of Crown PIP2™-compatible amplifi ers,
saving rack space and simplifying system
wiring.
The HD15 connector on ScreenArray PIPs is
designed for quick and easy interface with
popular cinema monitor products such as the
USL CM680.
You must have a PIP2-compatible amplifi er to
use the ScreenArray PIP modules. To deter-
mine if your amplifi er is PIP2-compatible, look
for the logo on the back of the
amplifi er. The ScreenArray PIP modules are
NOT compatible with older Crown PIP ampli-
fi ers.
Typical system wiring is shown in Figure 1.
For more details about the ScreenArray
PIP series, contact the Crown Technical
Support Group at 800-342-6939 or
574-294-8200. Also, visit the Crown Audio
website at www.crownaudio.com.
Specifi cations
PIP-4622
Frequency Response: See Figure 2 on back.
Signal-to-Noise Ratio: 90 dB, A weighted.
Input Impedance: 20 k ohms balanced, 10 k
ohms unblanced.
Input Connector: Electronically balanced,
3-position removable terminal block.
Input/Output Connector: HD15 connector.
PIP-3632
Frequency Response: See Figure 3 on back.
Signal-to-Noise Ratio: 90 dB, A weighted.
Input Impedance: 20 k ohms balanced, 10 k
ohms unblanced.
Input Connector: Electronically balanced,
3-position removable terminal block.
Input/Output Connector: HD15 connector.
S C R E E N A R R A Y
Features
• Custom 2-channel crossover networks
designed for use with JBL ScreenArray cinema
speaker systems
• Installs into the back of Crown PIP2-compat-
ible amplifi ers, saving rack space and simplify-
ing system wiring
• HD15 connector provides integrated signal
input and amplifi er output monitoring; works
with USL CM680 monitor panel (or other)
• User setable 6.6 dB full-band attenuator
PIP-4632
Frequency Response: See Figure 4 on back.
Signal-to-Noise Ratio: 90 dB, A weighted.
Input Impedance: 20 k ohms balanced, 10 k
ohms unblanced.
Input Connector: Electronically balanced,
3-position removable terminal block.
Input/Output Connector: HD15 connector.
From USL CM680
OPTIONAL INPUT PATHS
From Cinema Processor
®
S E R I E S
• Standard VGA cables can be wired for intercon-
nect
• Applications include cinemas, studio produc-
tion and post-production environments
• Low noise, wide frequency response
• Three-Year, No-Fault, Fully Transferable War-
ranty completely protects your investment
and guarantees its specifi cations
Figure 1. Typical System Wiring