Inventory Rack (Option) - Panasonic MDF-DU900V Operating Instructions Manual

INVENTORY RACK (OPTION)

The optional inventory racks (IR-220U, IR-224U) are useful to store the precious materials in the chamber
effectively. When the racks are used, it is necessary to adjust the height of the shelves. Set the shelf
stopper as shown in the figure below.
<Attachment of shelf stopper>
WARNING
Fix the shelf supports and shelves securely. And store the inventory racks securely.
Incomplete installation may cause injury or damage.
IR-220U
IR-224U
1. Insert the upper side.
2. Push-in the lower side
NOTE：
Only inventory rack IR-220U can be applied
when the independent inner door (MDF-9ID)
is installed.
Shelf support
Shelf stopper
No. 4 under second screw from the top
(There is a mark which hollowed at the
shelf support front side.)
No. 3 under fifth screw from the top
(There is a mark which hollowed at the
shelf support front side.)
No. 2 under third screw from the top
(There is a mark which hollowed at the
shelf support front side.)
57