Falcon Predator EVO4+2 Installation Manual

Vehicle security system with remote starter & lcd pager
Hide thumbs Also See for Predator EVO4+2:

Advertisement

Quick Links

FALCON PREDATOR EVO4+2
Vehicle Security System with Remote Starter & LCD Pager

Table of Contents:

A) Introduction ..............................................................................................................2
A-1) Features ......................................................................................................2
A-2) Key Function Table........................................................................................2
B) Optional Programming Features ...................................................................................3
C-1) Programming Option Table .............................................................................3
B-2) Explanation of Programming Options ...............................................................4
C) Remote Transmitter Code Learning ..............................................................................7
D) Installation Notes ......................................................................................................7
D-1) Ignition 2 Connection ....................................................................................7
D-2) Installation without Remote Starter Features ....................................................7
E) Suggested Location of Installing the Antenna .................................................................8
F) Wiring Diagram..........................................................................................................9
G) Wiring Note #1 ....................................................................................................... 10
H) Wiring Note #2 ....................................................................................................... 11
Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK
Internet: http://www.falcon-security.com
F A L C O N
WORLD CLASS SE CURITY
Installation Manual
HELPLINE: 0906 700 10 20
(All calls charged at 50p/min)
Email: support@falcon-security.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Predator EVO4+2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Falcon Predator EVO4+2

  • Page 1: Table Of Contents

    F) Wiring Diagram......................9 G) Wiring Note #1 ....................... 10 H) Wiring Note #2 ....................... 11 HELPLINE: 0906 700 10 20 (All calls charged at 50p/min) Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK Internet: http://www.falcon-security.com Email: support@falcon-security.com...
  • Page 2: A) Introduction

    A) Introduction The Falcon Predator EVO4+2 is a unique Vehicle Security System with Remote Engine Starter System and is designed to provide the highest level of security and convenience. Thanks to the built in two-way interactive communications system the small palm size LCD remote transmitter will instantly alert you audibly and if the alarm is triggered.
  • Page 3: B) Optional Programming Features

    B) Optional Programming Features The Predator EVO4+ has additional features for different types of vehicles. Read the below programming functions carefully to have the right options programmed for your vehicle and your needs. a> Under the system disarm mode, keep the door open, and switch the ignition on-off, on-off, on-off and then back to On.
  • Page 4: B-2) Explanation Of Programming Options

    B-2) Explanation of Programming Options 01) Chirp confirmation on/off: Factory default = On The siren will chirp once to enter armed mode and twice to enter disarmed mode when programmed as on. The siren will not chirp if programmed as off. 02) Shock Sensor Bypass: Factory default = Disabled When programmed as Disabled: The shock sensor will work normally When programmed as First: The 1...
  • Page 5 When programmed as Disabled: The siren will chirp, hazard lights will flash 3 times and LED will show 3 flashes if the door, boot or bonnet is not closed properly. When the system enters armed mode the violated zone will be bypassed but all other areas will remain protected. When programmed as 15 or 40 seconds: If the door, boot or bonnet is not closed properly the siren will chirp, hazard lights will flash 3 times and the LED will show 3 flashes.
  • Page 6 If the system is disarmed the door unlocks before and after remote starting the engine. 18) Remote start mode: Factory default = Alternator To program the Remote Start Mode as Alternator or Tach. RPM (TACH) Learning: - Perform the Tach Learning before using the remote start for the first time - Make sure the Tach wire(C4-1 Green) of the alarm system is connected to the negative of the coil as shown in the wiring diagram Before performing the RPM (Tach) learning turn off all electrical devices such as car stereo, FM...
  • Page 7: C) Remote Transmitter Code Learning

    When programmed as Enabled: The windows will be closed automatically when pressing button 1 or 1+2 to arm the system. With the feature enabled, the CH3 output will be unable to be operated by remote control. When programmed as Disabled: The channel 3 output will be activated as long as pressing and holding buttons 1+3 for 1 second.
  • Page 8: E) Suggested Location Of Installing The Antenna

    E) Suggested Location of Installing the Antenna * Install the antenna at the right or left upper of the windshield * Keep the antenna at least 5cm away from the car frame * Don’t power on the main unit if the antenna is not connected * Keep the antenna at least 5cm apart from solar control window film...
  • Page 9: F) Wiring Diagram

    F) Wiring Diagram...
  • Page 10: G) Wiring Note #1

    G) Wiring Note #1...
  • Page 11: H) Wiring Note #2

    H) Wiring Note #2...

Table of Contents