System; Account (User Mng.) - Panasonic K-EW114L03AE Operation Manual

4.6 System

Account (User mng.)

4.6.1
Note:
For the character in the following user name or the user group name, system max supports 15-

digits. The valid string includes: character, number, and underline.
Password can be 0~32 characters in number and letter only. User can modify other user's

password.
The factory default setup includes two levels: user and admin. You can set the corresponding group

and then set the rights for the respective user in the specified groups.
User management adopts group/user modes. The user name and the group name shall be unique.

One user shall be included in only one group.
Currently logged in user cannot change his/her own right.

4.6.1.1 User Name
In this interface you can enable anonymity login, add/remove user and modify user name. See Figure
4-48.
Enable anonymity login: Enable anonymity login, and input IP. No username or password is required,
you can log in by anonymity (with limited rights). You can click logout to end your session.
Add user: It is to add a name to group and set the user rights. See Figure 4-49.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 4-48
69