Video Window Function Option; Zoom And Focus (K-Ew214L01E, K-Ef234L01E) - Panasonic K-EW114L03AE Operation Manual

2.5 Video Window Function Option

The interface is shown as below. See Figure 2-11.
Please refer to the following sheet for detailed information.
SN Parameter
Zoom and
1
Focus
Original
2
Size
Full Screen
3
Width and
4
Height ratio
Fluency
5
Adjustment
Snapshot
6
Triple
7
Snapshot
Record
8

Zoom and Focus (K-EW214L01E, K-EF234L01E)

2.5.1
Click this button and the zoom and focus interface appears on the encode setup bar, as shown in
Figure 2-12, please refer to the following sheet for detail information to adjust zoom and focus
configuration.
Note:
 Auto-focus after zoom focus adjustment.
 Disable the operation till finishing zoom and focus adjustment.
1 2 3
Function
Click this button and the zoom and focus interface appears on
encode setup bar, as shown in figure 2-12.
(K-EW214L01E, K-EF234L01E)
Click this button to go to original size. It is to display the actual
size of the video stream. It depends on the resolution of the
bit stream.
Click it to go to full-screen mode. Double click the mouse or
click the Esc button to exit the full screen.
Click it to restore original ratio or suitable window.
There are three levels of fluency for you to select. The default
is real-time with minimum delay. You may select fluent mode
in case connection is slow.
You can snapshot important video by clicking on this button.
All images are memorized in system folder: \ picture
download (default).
You can go to Setup -> Image -> JPEG/H.264 -> Path to
modify the local record save path.
Click it, system can snap at 1 fps. All images are memorized
in system storage folder.
For manual record. All records are memorized in Setup ->
Image -> JPEG/H.264 -> Path.
4 5 6
Figure 2-11
7 8
11