Panasonic K-EW114L03AE Operation Manual page 50

Parameter
Attachment
Mail Receiver
Interval
Health Mail
Update Period
(interval)
Email Test
Function
System can send out the email of the snapshot picture once
you check the box here.
Input receiver email address here. Max three addresses.
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, VMD or the
abnormity event activates the email, system sends out the
email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Please check the box here to enable this function.
This function allows the system to send out the test email to
check the connection is OK or not.
Please check the box to enable this function and then set the
corresponding interval.
System can send out the email regularly as you set here.
The system will automatically sent out an email once to test
the connection is OK or not .Before the email test, please
save the email setup information.
46