Standby Electricity Saving
The standby electricity saving function turns off power supply to the outdoor unit and sets the indoor unit into
standby electricity saving mode, thus reducing the power consumption of the air conditioner.
CAUTION
• The standby electricity saving function cannot be used for models other than the specified ones.
■ Procedure for turning on standby electricity saving function
1) Check that the main power supply is turned off. Turn it off if has not
been turned off.
2) Remove the stop valve cover.
3) Disconnect the selective connector for standby electricity saving.
4) Turn on the main power supply.
CAUTION
• Before connecting or disconnecting the selective connector for standby electricity saving, make sure that the main power
supply is turned off.
• The selective connector for standby electricity saving is required if an indoor unit other than the above applicable ones is
connected.
■English
1
2
3
Standby electricity saving
Standby electricity saving
function off.
function on.
The standby electricity saving function is turned off
before shipping.
1
2
3
8