Displaying The "Mixtrax Settings" Screen; Setting The Flash Pattern; System Settings; Displaying The "System" Setting Screen - Pioneer AVH-X5890BT Owner's Manual

MIXTRAX
Displaying the "MIXTRAX
Settings" screen
1 Press .
2 Touch , and then [AV Source Settings].
3 Touch [MIXTRAX Settings].
The "MIXTRAX Settings" screen appears.
Setting the playback portion
You can specify the playback portion.
The default setting is "60s".
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
31
2 Touch [Short Playback Mode].
3 Touch the item.
The following items are available:
Off, 60s, 90s, 120s, 150s, 180s, Random.
Setting the display effect
You can set the effect display for MIXTRAX.
The default setting is "On".
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
31
2 Touch [Display Effect] to switch "On" or "Off".
Setting the cut-in effect
You can set the effect tone that sounds when you skip tracks
forwards or backwards.
The default setting is "On".
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
31
2 Touch [Cut-In Effect] to switch "On" or "Off".
Setting the MIXTRAX effect
You can set and play back the MIXTRAX effect that you want.
The default setting is "Standard".
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
31
2 Touch [Effect Setting].
3 Touch the item.
The following items are available:
Standard, Simple, Custom
p When you select "Custom", check the effect that you want.

Setting the flash pattern

The flashing colour changes with the changes in the sound and
bass levels.
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
31
2 Touch [Flash Pattern].
3 Touch the item.
 Sound1 (default) to Sound6:
The flash pattern changes according to the sound level.
Select a desired mode.
 L-Pass1 to L-Pass6:
The flash pattern changes according to the bass level. Select
a desired mode.
 Random1:
The flash pattern changes randomly according to the sound
level mode and low pass mode.

Random2:
The flash pattern changes randomly according to the sound
level mode.
 Random3:
The flash pattern changes randomly according to the low
pass mode.

Off:
The flash pattern does not flash.

System settings

Displaying the "System" set-
ting screen
1 Press .
2 Touch , and then .
The "System" setting screen appears.
Setting the steering wheel
control
You can set the steering wheel control on the display via a wired
remote cable.
 Refer to Power cord on page 44
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This setting is available when turn all the sources off.
This setting is required for using the steering wheel remote
control function.
p You can set a function key to more than one steering wheel
key.
p You can set only one function key to a steering wheel key.
p If you make a mistake after connecting this product with the
supplied wired remote cable, please reset it.
p If this function does not work correctly, contact your dealer
or an authorised Pioneer Service Station.
p When you start to set, all the default key settings is automati-
cally cleared.
For steering wheel control adapter
for Pioneer users
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
31
2 Touch [Steering Wheel Control].
3 Touch [With Adapter].
4 Touch [OK].
Registering function to each key
manually
1 Display the "System" setting screen.
31