Auxiliary Function Selection - Beko WMY 71483 LMB2 User Manual

4.3.7 Auxiliary function selection

Select the desired auxiliary functions before starting the programme.
Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will
illuminate.
C
Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will flash and an
audio warning is given.
Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme
after the washing cycle starts. If the wash cycle has reached a point where no auxiliary function can be
selected, an audio warning will be given and the related auxiliary function's light will flash.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before
starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain
active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption
table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being washed. Drum movement is reduced and spin
speed is limited to prevent creasing. In addition, washing is done with a higher water level.
• Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
4.3.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
In order for the End Time function to be activated and the programme to be completed at the end of the
specified time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
Washing Machine / User's Manual
liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
17 / EN