LG LMXS27626 Series Owner's Manual page 47

TROUBLESHOOTING 47
Frost or ice
crystals on frozen
food (inside of
sealed package).
Condensation from food with a
high water content has frozen
inside of the food package
This is normal for food items with a high water
content.
Food has been left in the freezer Do not store food items with high wafer content
for a long period of time in the freezer for a long period of time.
Icemaker is not Demand exceeds ice storage The icemaker will produce approximately
making enough capacity 70-210 cubes in a 24 hour period
ice
House water supply is not
connected, valve is not turned
on fully, or valve is clogged
Water filter has been
exhausted
Low house wafer supply
pressure
Reverse Osmosis filtration
system is used
Tubing connecting refrigerator
to house supply valve is kinked
Connect the refrigerator to a cold wafer supply
with adequate pressure and turn the water
shutoff valve fully open.
If the problem persists, it may be necessary to
contact a plumber.
It is recommended that you replace the wafer
filter:
Approximately every six months.
When the wafer filter indicator turns on.
When the water dispenser output decreases
When the ice cubes are smaller than normal.
The water pressure must be between 20 and 120
psi (140 and 830 kPa) on models without a water
filter and between 40 and 120 psi (280 and 830
kPa) on models with a water filter.
If the problem persists, it may be necessary
to contact a plumber
Reverse osmosis filtration systems can reduce
the wafer pressure below the minimum amount
and result in icemaker issues
(Refer to Water Pressure section)
The tubing can kink when the refrigerator is
moved during installation or cleaning resulting
in reduced water flow Straighten or repair the
water supply line and arrange it to prevent future
kinks.