Making A Phone Call - Dual DC416BT Installation & Owner's Manual

Manual Dialing
Recent Calls List
Redialing the last number
Receiving a Phone Call
Ending a Phone Call
Bluetooth
Making a Phone Call
• Press
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press
DC416BT front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the DC416BT.
• Press SELECT from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the DC416BT.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or
To redial the last phone number, press
Bluetooth mode. Press
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the DC416BT. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press
• Press
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
If the phone call was received when listening to music in
another mode, the DC416BT will resume the previous mode.
DC416BT
Operation
®
once. "Enter Phone Number" will be shown, then
on the remote control or
again to redial the phone number.
to receive the incoming phone call.
to refuse the incoming phone call.
OPERATION
to dial the phone number.
two times from
to end a phone call.
19