Axis P3905-RE User Manual page 55

AXIS P3905-RE Network Camera
Troubleshooting
Video and image problems, general
Image unsatisfactory
Disturbed focus
Storage and disk management problems
Storage disruption
Video cannot be recorded
SD card cannot be mounted
Check the video stream and camera settings under Setup > Video > Video Stream and Setup >
Video > Camera Settings.
Set the focus manually by gently push and turn the focus ring.
Set the focus manually by using the black rubber side of the lens tool. Insert the tool carefully
and hold pressed while turning to adjust focus.
A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other
read or write problems occur. To identify the source of the problem, check the System Log under
System Options > Support > Logs & Reports. Depending on the problem, it might be necessary to
re-mount the storage device.
For information on how to set up a storage disruption alarm, see About events on page 31.
Check that the SD card is not write protected (that is, read only).
Reformat the SD card and then click Mount.
NOTICE NO NO TICE TICE
Formatting the card will remove all content, including all recordings, from the SD card.
55