Axis P3905-RE User Manual page 19

AXIS P3905-RE Network Camera
About video settings
The Contrast changes the relative difference between light and dark. It can be adjusted using the slidebar.
About white balance
To change this setting go to Setup > Video > Camera Settings
White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis
product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light
source from the drop-down list. For a description of each available setting, see the online help
The white balance window is enabled for the Automatic and Automatic outdoor options that appear in the White balance drop-down
list. Select one of the options from the drop-down list to set the white balance window properties. Select Automatic to use the
default settings for the Automatic and Automatic outdoor options (in the White balance drop-down list). Select Custom to manually
set a reference window for white balance in the view area.
Wide Dynamic Range
Wide dynamic range (Dynamic Contrast) can improve the exposure when there is a considerable contrast between light and dark
areas in the image. Enable WDR in intense backlight conditions. Disable WDR in low light conditions for optimal exposure.
Note
This setting is only possible when using automatic exposure control.
Traffic Light mode
This mode will decrease the exposure, so that traffic lights and other bright light sources will not saturate when in view at night.
In this mode, it is possible to distinguish the color of the traffic lights at any surrounding light level. This mode is also favorable
for license plate recognition.
Note
The decrease in exposure will make the whole image darker, during conditions above.
This setting will disable the Exposure Settings for best results.
Exposure Settings
Exposure is the amount of light the camera's sensor captures for a scene. Too much light results in a washed out image and too
little light results in a dark image.
Exposure value - Use the Exposure value slider to adjust the overall brightness of the image.
Exposure control - Select a suitable option to control exposure.
For most scenes, the Automatic option will provide the best results. The shutter speed is automatically set to produce optimum
image quality. Fluorescent lamps or other light sources can sometimes cause flickering in the image. To reduce flicker in the image,
select the Flicker option that matches the power line frequency.
The Hold current option locks the current exposure settings.
Max exposure time - Shutter speed, also called 'exposure time', stands for the length of time the camera shutter is open, thereby
exposing the camera sensor to light. If shutter speed is fast it can freeze action effectively. If shutter speed is slow, it can cause
moving objects to appear blurred. Decreasing the exposure time will reduce motion blur.
Enable Backlight compensation - Enable this option if a bright spot of light, such as a light bulb, causes other areas in the image
to appear too dark.
Exposure zones - This setting determines which part of the image is used to calculate the exposure. For most situations, the Auto
setting can be used.
You can select a predefined area by defining Include and Exclude windows within the image. Exclude windows exclude areas that are
too bright or dark, and Include windows include areas in the scene that have better lighting which will contribute to the exposure data.
There must be at least one Include window. There can be a total of ten Include and Exclude windows to tailor the exposure zone.
Note that an Exclude window is effective only when placed inside an include window.
19
.