Gigabyte GA-990FXA-UD3 User Manual page 62

Create a RAID Array
To create a new array, press <2> to enter the LD View Menu window (Figure 4). To create an array, press
<Ctrl+C> to access the LD Define Menu.
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
[h] Up [i] Down [PaUp/PaDn] Switch Page [Ctrl+C] Define LD
[Enter] View LD [Ctrl+V] View Single Disk [ESC] Exit
In the LD Define Menu, use the up or down arrow key to move to an item for further configuration (Figure 5).
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
LD No LD Name
LD 1 Logical Drive 1
Stripe Block
Gigabyte Boundary
Read Policy
Port:ID Drive Model
01:00 WDC WD800JD-22LSA0
02:00 WDC WD800JD-22LSA0
[h] Up [i] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
Configuring SATA Hard Drive(s)
[ LD View Menu ]
< There is no any LD >
[ Keys Available ]
Figure 4
[ LD Define Menu ]
64 KB
ON
Read Ahead
[ Drives Assignments ]
Capabilities
SATA 3G
SATA 3G
[ Keys Available ] [ Keys Available
Figure 5
- 62 -
RAID Mode Drv
RAID 0 0
Initialization Fast
Write Policy WriteBack
Capacity (GB)
79.89
80.02
]
Assignment
N
N