Gigabyte GA-990FXA-UD3 User Manual page 48

& VIA 1394 Controller
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
& OnChip SATA Controller (AMD SB950 SATA Controllers)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type (AMD SB950 South Bridge, SATA3 0~3 connectors)
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
AHCI
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& OnChip SATA Port4/5 Type (AMD SB950 South Bridge, SATA3 4~5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
Configures the SATA3 4~SATA3 5 connectors to PATA mode. (Default)
IDE
& HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& R_USB3.0 Controller (VIA
Enables or disables the VIA
& Onboard eSATA Controller (Marvell
Enables or disables the SATA controller integrated in the Marvell
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
BIOS Setup
VL805 USB Controller, USB 3.0/2.0 ports)
®
VL805 USB controller. (Default: Enabled)
®
88SE9172 Chip, eSATA connectors)
®
- 48 -
88SE9172 chip. (Default: Enabled)
®