Switching Between The Listening Programs; Zen - Widex CLEAR 440 C4-PA User Instructions

Switching between the listening programs

Each time you change program via the remote control,
an acoustic indicator will sound unless this function has
been disabled.
Program 1: Message or one short beep
Program 2: Message or two short beeps
Program 3: Message or three short beeps
Program 4: Message or one long and one short beep
Program 5: Message or one long and two short beeps

Zen+:

Tone or message
In the default setting, both your hearing aids will be af-
fected when you change programs.
Zen+
This program is accessed via a long press (two secs.)
on the RC-DEX program key. A short press then allows
you to cycle through the available Zen styles. You can
exit Zen+ by pressing and holding the program key for
two seconds.
19