Switching Between The Listening Programs; Zen - Widex CLEAR 440 Series User Instructions

Switching between the listening programs

Each time you change program via a remote control,
an acoustic indicator will sound unless this function
has been disabled.
Program 1: Message or one short beep
Program 2: Message or two short beeps
Program 3: Message or three short beeps
Program 4: Message or one long and one short beep
Program 5: Message or one long and two short beeps

Zen+:

Message or tone
In the default setting, both your hearing aids will be
affected when you change programs.
Zen+
This program is accessed via a long press (two secs.)
on the RC program key. A short press then allows you
to cycle through the available Zen styles.
You can exit Zen+ by pressing and holding the program
key for two seconds.
20