Technical Data; Noise/Vibration Information - Bosch GWS Professional 8-115 Original Instructions Manual

36 | en
1 Release lever for protection guard
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
5 Grinder spindle
6 Protection guard for grinding
7 Protection guard for cutting*
8 Mounting flange with O-ring
9 Grinding disc*
10 Cutting disc*
11 Clamping nut
12 Quick-clamping nut

Technical data

Angle grinder
Article number
Rated power input
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle*
Thread length (max.) of grinder spindle
Weight according to EPTA – Procedure 01/2003
Net weight**
Protection class
*For Central América countries spindle thread Ø 5/8".
**Measured without protection guard and auxiliary handle.
The values given are valid for nominal voltages [U] of 127 V or 220 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Noise/vibration information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 91 dB(A); Sound
power level 102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Surface grinding: Vibration emission value
2
a =5.5 m/s , Uncertainty K=2.0 m/s
h
F 000 622 309 | 11.2009
0_GWS8_115ET_pag5a40.indd 36
13 Hand guard*
14 Rubber sanding plate*
15 Cup brush*
16 Sanding sheet*
17 Round nut*
18 Handle (insulated gripping surface)
*The accessories shown or described are not
part of the product. Check the available
accessories in the sales program from your
country.
*
Disk sanding: Vibration emission value
a =3.0 m/s
h
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
2
,
increase the exposure level over the total working
period.
Operating instructions
GWS 8-115
Professional
3 601 H20 8..
W
/min
mm
mm
kg
kg
2 2
, Uncertainty K=1.5 m/s
Robert Bosch Ltda.
850
11000
115
M 14
22
1,9
1,7
/II
.
03.12.09 14:51:26