Table of Contents
Advertisement
DHCP Server Relay: Enable with checkbox and enter DHCP Server IP address.
ND
2
LAN INTERFACE
To configure a secondary IP address, tick the checkbox outlined (in RED) below.
IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask: Enter the secondary subnet mask for the LAN port.
Ethernet Media Type:
Configure auto negotiation, or enforce selected speed and duplex mode for each
Ethernet port.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address. This option is hidden if NAT is enabled
or when the router is configured with only one Bridge
PVC.
41
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AR-5381u and is the answer not in the manual?