Login Procedure - Comtrend Corporation AR-5381u User Manual

3.3 Login Procedure

Perform the following steps to login to the web user interface.
NOTE: The default settings can be found in
STEP 1: Start the Internet browser and enter the default IP address for the device
in the Web address field. For example, if the default IP address is
192.168.1.1, type http://192.168.1.1.
NOTE: For local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the IP address shown on the
Device Information screen and login with remote username and
password.
STEP 2: A dialog box will appear, such as the one below. Enter the default
username and password, as defined in section
Click OK to continue.
NOTE: The login password can be changed later (see
3.1 Default Settings.
3.1 Default
8.6.1
16
Chapter 4
Settings.
Accounts).