Security Settings - Fax - Epson l565 User Manual

Setting
Distinctive Ring
Rings to Answer
Remote Receive
Parent topic:

Security Settings - Fax

Set the security options you want to use for fax data.
Setting
Backup Data Auto Clear Off
Clear Backup Data
Parent topic:
Options
All
Single
Double
Triple
Double&Triple
1 to 9
Off
On
Start Code
Setting Up Fax Features Using the Product Control Panel
Options
On
—
Setting Up Fax Features Using the Product Control Panel
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. All works for phone lines that do not use this
service.
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you enable this function, you
need to set a Start Code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
Description
Automatically erases sent or received fax data
remaining in your product's memory
Deletes all sent or received fax data remaining in your
product's memory; run this function if you are giving
away or disposing of your product
149