Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson l565 User Manual

You see the
product from your computer or device.
Note: If the
enabled. Repeat these steps to try again.
Parent topic:
Related tasks
Entering Characters on the LCD Screen

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
You see this screen:
connection symbol on the LCD screen and should be able to print directly to your
connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
37