Table of Contents
Advertisement
i)
Click Copy button to copy current setup to other channel(s).
j)
Click OK button to complete motion detect record setup.
4.8.3.2 Motion Detect Snapshot
a)
From Main menu->Setting->Camera->Encode->Snapshot, you can go to snapshot interface.
See Figure 4-64.
b)
In Figure 4-64, select trigger snapshot from the dropdown list and then set picture size, quality
and snapshot frequency. Click OK button to save current setup.
c)
From Main menu->Setting->Event->Detect, here you can select motion detect type, motion
detect channel and then check the enable box. Please refer to chapter 4.8.3.1.
d)
Click OK button to complete motion detect setup.
Figure 4-62
Figure 4-63
153
Advertisement
Table of Contents
