Wifi - Techpro NVR-ELE16C-P4K User Manual

Please refer to the following sheet for detailed information.
Parameter
SSID
Password
Authorization
Encrypt type
Start IP/End IP
WPS
Remote device

5.8.2.5 WIFI

Please note this function is for the device of WIFI module.
The WIFI interface is shown as in Figure 5-31.
Figure 5-30
Function
It is to set SSID name. You can use this name to search the
device.
It is to set SSID password. You can use this password to
connect to the network.
Select authentication from the dropdown list.
Select encryption type from the dropdown list.
Input start IP and end IP. The NVR can allocate the IP address
in the range you specified here.
Click WPS button to enable WPS function. After the network
camera enabled this function, it can automatically connect to the
network.
In the list, you can view the network camera(s) that connected
to the NVR. It includes signal intensity, IP, MAC address, bit
rate, channel number, type, status and etc.
255