Call Ptz Function - Techpro NVR-ELE16C-P4K User Manual

Scan Setup
In Figure 4-42, click Scan button.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup process is
complete.

4.7.2.2 Call PTZ Function

Call Preset
In Figure 4-41, input preset value and then click
Call Pattern
In Figure 4-41, input pattern value and then click
call.
Call Tour
In Figure 4-41, input tour value and then click
Figure 4-45
Figure 4-46
to call a preset. Click
to call a pattern. Click
to call a tour. Click again
again to stop call.
again to stop
to stop call.
142