Specifications - Stihl MS 382 Instruction Manual

Specifications

Engine
STIHL single cylinder two-stroke engine
Displacement: 72.2 cc
Bore: 52 mm
Stroke: 34 mm
Engine power to 3.9 kW (5.3 bhp)
ISO 7293: at 9,500 rpm
1)
Idle speed: 2,800 rpm
1)
to ISO 11681 +/- 50 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 680 cc (0.68 l)
Chain Lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Oil tank capacity: 360 cc (0.36 l)
MS 382
Weight
dry, without bar and chain
MS 382:
Cutting Attachment
Actual cutting length may be less than
the specified length
Rollomatic E guide bars
Cutting lengths: 40, 45, 50, 63 cm
Pitch: 3/8"
Groove width: 1.6 mm
Nose sprocket: 11-tooth
Rollomatic ES guide bars
Cutting lengths: 40, 45, 50, 63 cm
Pitch: 3/8"
Groove width: 1.6 mm
Nose sprocket: 11-tooth
3/8" chains
Rapid Micro (36 RM) Type 3652
Rapid Super (36 RS) Type 3621
Rapid Super 3 (36 RS3) Type 3626
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.6 mm
Chain sprocket
7-tooth for 3/8" (rim sprocket)
Max. chain velocity to
ISO 11681:
Chain speed at maximum
power output:
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
6.2 kg
www.stihl.com/vib.
Sound pressure level L
106 dB(A)
Sound power level L
118 dB(A)
Vibration measurement a
ISO 22867
Left handle:
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
27.5 m/s
The CO value measured in the EU type
2
21.7 m/s
approval procedure is specified at
www.stihl.com/co2.
English
to ISO 22868
p
to ISO 22868
w
to
hv,eq
2
5.4 m/s
2
5.4 m/s
2
91